-
-
July 19, 2024 at 9:58 amJose Matias Arbelo RomeroSubscriber
Hi,
I want to flush the CPUs cache in the Linux environment. I used the -cflush flag. It crashes before the operation is finished. In this link (cache flushing flag option -cflush leads to a crash during grid building process - Ansys Knowledge) it says an alternative solution would be incorporated in future version releases (from 17). I am using 2023R1. Is there an alternative solution to the -cflush flag built into the Fluent software.
Best regards,
Â
-
July 19, 2024 at 2:17 pmGeorge KarnosAnsys Employee
Hi Jose,
In the fluent launcher go to Environment tab and enter the following variable in the box:FLUENT_CROSS_PLATFORM_SCHEDULER_ARGS="-cflush"
Best Regards,
George -
July 19, 2024 at 2:32 pmJose Matias Arbelo RomeroSubscriber
Dear George,
How about from the Linux environment?
Best regards
-
Viewing 2 reply threads
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- RSS is disabled.
- ANSYS Mechanical won’t open and stays on Blank Gray Screen (Path environment va)
- Elastic Licensing DNS gateway changes
- Poor quality mesh at trailing edge for 3d wing
- Ansys 2024 R1 – The installation completed with warnings/errors.
- LS-Dyna Beam elements outputs
- Fluent
- Not find helic___[]_.tgz file
Top Contributors
-
416
-
187
-
178
-
156
-
140
Top Rated Tags
© 2024 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.