Learning Forum

[Zainab Zikar]

It is not allowing me to change the scale 

[Rob]

Assuming that's CFD Post, look at the scale/colourmap options in the list to the left side of the screen. 

[NickFL]

That colorbar looks like ANSYS Mechanical. This is a Fluids (Fluent, CFX, Polyflow, etc.) forum, so maybe it would be better to ask over in the General Mechanical forum. But it could be that you are looking at a static image and not the interactive results. Without more details, or a full screenshot (you can over the model), there is not much advice to give.

[Rob]

Nick - it's the Product section. :)  But yes, it could well be Mechanical! 

[NickFL]

Sorry, I must be virtually lost here. I normally hang out over in the Fluids section. As my daughter would sing, "Ich hab' mich verlaufen".

[Rob]

Or, "oops"... :)   If you go to All Channels and look carefully at the different channels you can tag some channels to show in "My Channels". 

[Ashish Khemka]

Hi,

 

Please see if the following links help:

ANSYS How To: Result Legend Customization and Reuse - PADT (padtinc.com)

Script Tip Friday- Working with Legends in Mechanical Scripting (linkedin.com)

 

Regards,

Ashish Khemka

[Sampat Kumar]

 

 

Hi Zainab Zikar, 
As far as I can understand, you are not able to edit the legend. You can follow the above-mentioned solution provided by Ashish, which will give you detailed information about the legend in the ansys. In addition to this, I think it’s obvious that you have tried to edit the legend by right-clicking on the legend color or number, where you will find the option of editing and reseating the legend. I have attached some links that might help you resolve the issues.
/forum/forums/topic/colored-contour-bands/
/forum/forums/topic/legend-in-mechanical-not-interactive/

/forum/forums/topic/legend-in-mechanical-not-interactive/

All the best 
Sampat Kumar

/forum/forums/topic/how-to-access-the-ansys-online-help/

/forum/forums/topic/guidelines-for-posting-on-ansys-learning-forum/#latest