3D Bifurcating Artery
Modeling Objectives & Problem Description - Lesson 1
1 Topic
Summary of steps for ANSYS Workbench version 19.2
Pre-Analysis & Start-Up - Lesson 2
2 Topics
Governing Equations
Boundary Conditions
Geometry - Lesson 3
Mesh - Lesson 4
2 Topics
Inflation Mesh and Body Sizing
Named Selection
Physics Setup - Lesson 5
3 Topics
Solution Setup
Boundary Conditions
Particle Tracking
Numerical Solution - Lesson 6
2 Topics
Reference Values
Numerical Solution
Numerical Results - Lesson 7
6 Topics
Load Data from Solution Files
Plotting Velocity Vectors (3D)
Adding and Animating Particle Pathlines
Plotting and Animating Wall Shear on the Artery Wall
Creating a Sweep for Velocity Profile at Different Sections
Plot Contours at Specific Locations
Verification and Validation - Lesson 8
3 Topics
Mass conservation and Inlet boundary conditions
Mesh Refinement and Smaller Time-step
Validation
References - Lesson 9
Exercise - Lesson 10
3 Topics
Adding Obstructions to the Original Artery Geometry
Adding Stent to the Original Artery Geometry
Simulating the Non-Newtonian Fluid Using Casson Fluid Model
Post Completion Survey
Previous Lesson
Next Lesson
Login to Enroll
Summary of steps for ANSYS Workbench version 19.2
3D Bifurcating Artery
Modeling Objectives & Problem Description - Lesson 1
Summary of steps for ANSYS Workbench version 19.2
Previous Lesson
Back to Lesson
Next Lesson
