Why doesn’t SOLID90 have the same temp-dependent film coefficient evaluation options as SOLID70? I am using SOLID90 elements which do not have a keyoption to specify how the film coefficient will be evaluated. SOLID70 elements have keyopt(2) to do this. For example, keyopt(2)=1 specifies evaluation at element surface temperature, TS.

Learning Center
- Guided Learning Path
Free Courses
Learning Tracks
Certifications
Premium Learning
Knowledge
Streaming
Ansys Learning Hub
Events

Structural & Thermal

All Categories
Structures - Structural & Thermal
Why doesn’t SOLID90 have the same temp-dependent film coefficient evaluation options as SOLID70? I am using SOLID90 elements which do not have a keyoption to specify how the film coefficient will be evaluated. SOLID70 elements have keyopt(2) to do this. For example, keyopt(2)=1 specifies evaluation at element surface temperature, TS.

Why doesn’t SOLID90 have the same temp-dependent film coefficient evaluation options as SOLID70? I am using SOLID90 elements which do not have a keyoption to specify how the film coefficient will be evaluated. SOLID70 elements have keyopt(2) to do this. For example, keyopt(2)=1 specifies evaluation at element surface temperature, TS.

Tagged: 16.2, mechanical-apdl, modeling-and-meshing, static, structural-and-thermal, structural-mechanics

- April 5, 2023 at 2:31 pm
  
  FAQ
  Participant
  
  SOLID90 has the exact same options as SOLID70 using keyopt(3) instead of keyopt(2), but they are undocumented.

Introducing Ansys Electronics Desktop on Ansys Cloud

The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)

This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent

The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight

This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.

Trending Articles

How to reduce contact penetration?
How to decide which side should be Contact and which should be target in Contact definition?
How do I export all result objects data in tabular format?
What is the difference between secant and instantaneous coefficients of thermal expansion (CTE)?
How to use the Newton-Raphson residuals option under Solution Information?
What is the cause of the following ANSYS Mechanical error? “The normal of target element 19817570 is not consistent with the normal of target element 19817571 in real set 171. Please use the ENORM command to correct it.”
How to plot stresses of a beam connection in Workbench?
Difference Between Environment Temperature and Reference Temperature in Mechanical
How can I apply a controlled rotation in ANSYS Mechanical
How to find total heat flowing through a surface in Mechanical?

See all

Top Rated Tags

19
contact
Contact penetration
convergence
General
mechanical
nonlinear
structural-and-thermal
structural-mechanics
18.2