We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
Fluids

Fluids

Topics related to Fluent, CFX, Turbogrid and more.
  1. All Channels
  2. Fluids
  3. unable to apply flow rate boundary condition at inlet using .csv file

unable to apply flow rate boundary condition at inlet using .csv file

    • March 28, 2025 at 1:14 pm
      aartikoli11may
      Subscriber

      Hello everyone, I am performing FSI simulation in 3D bifurcating artery. I want to use the above data as flow rate boundary condition at inlet but unable to do it in ANSYS Fluent. Please help me. Here x is representing time in the data.

    • March 28, 2025 at 2:11 pm
      Rob
      Forum Moderator

      Have a look at transient profiles, or the DEFINE_PROFILE UDF as you'll need to cycle the flow data every 0.158893s or so. 

Viewing 1 reply thread
  • You must be logged in to reply to this topic.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.