Setup an RSM with two NIC (two different networks)

- October 15, 2021 at 8:38 pm
  
  hosea
  Subscriber
  
  Hi, I have a question in regards to configuring a new RSM host and am wondering if the configuration my team is wanting to make is even possible. The computer I am trying to configure the RSM on to has two NICs. Each NIC is connected to two different networks reason being that the university I work for has our wired and wireless network completely segregated to two different vlans. We are trying to get the rsm configured but we are discovering that sometimes only wired or sometimes only wifi computers can reach the rsm, unfortunately not both. I know with our network setup I will have to involve more of my university's network team abroad to figure out but I am inquiring here if there is anything specific we need to implement in the RSM configuration for both wired and wifi clients to both work in sending jobs to the RSM or if dual honing is not an option for RSM to work properly.
- October 26, 2021 at 4:41 pm
  
  George Karnos
  Ansys Employee
  
  Please refer to the RSM Guide:
  This section talks about Multiple NICs:
  https://ansyshelp.ansys.com/account/secured?returnurl=/Views/Secured/corp/v212/en/wb_rsm/wb_rsm_mult_nic.html