TAGGED: topology-optimization
-
-
October 27, 2024 at 7:10 pm
-
October 28, 2024 at 12:06 pmDeepakAnsys Employee
Hi,
Please check whether the Design region bodies are selected the same in both the Optimization Region and Design Constraint.
Regards,
Deepak K.
Guidelines for Posting on Ansys Learning Forum
How to access the ANSYS Online Help -
October 29, 2024 at 7:23 pm258344Subscriber
My main problem was when I connected optimization to static structural. At that moment, a question mark appeared here, and nothing could be done about it. I have selected regions in all different ways.
-
Viewing 2 reply threads
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- Speed up simulation in HFSS
- RSS is disabled.
- ANSYS Mechanical won’t open and stays on Blank Gray Screen (Path environment va)
- ANSYS DISPLAY RESOLUTION PROBLEM
- ansys fluent error when opening it “unexpected license problem”
- Workbench license error
- Ansys 2024 R1 – The installation completed with warnings/errors.
- Could not connect to a valid licensing server
- LS-Dyna Beam elements outputs
- Unexpected error on Workbench: Root element not found.
Top Contributors
-
791
-
407
-
265
-
201
-
162
Top Rated Tags
© 2024 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.