We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
Electronics

Electronics

Topics related to HFSS, Maxwell, SIwave, Icepak, Electronics Enterprise and more.
  1. All Channels
  2. Electronics
  3. RMxprt Error

RMxprt Error

TAGGED: , ,

    • September 21, 2022 at 10:08 am
      Vinay_G
      Subscriber

      Hello,

      When I tried to edit the RMxprt example model as I have change the rotor to my design apart from the pre-defined the rotor types. When I try to simulate I am getting the following error. 

      Error: "Separate Operation Failed due to lump count inconsustancy. Found 28 lumps instead of expected 7 lumps."

      Kindly someone help me out here.

    • September 21, 2022 at 12:54 pm
      GLUO
      Ansys Employee

      Hello @Vinay_G,

      This error message is caused by the modified geometry conflicts with the auto-generation history (usually has a separate operation). You could resolve this error by finding the parts that causing this problem and purging its history.

      Regards,

      GL

    • September 22, 2022 at 11:41 am
      Vinay_G
      Subscriber

      Thanks for the info. Issue resolved! 

Viewing 2 reply threads
  • The topic ‘RMxprt Error’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.