-
-
November 11, 2025 at 11:27 am
1943790254
Subscriber我在计算换热器仿真时,设定步数为1500步,运行到700步时收敛,我是刚开始接触这个,使用的软件是ansys16,可能是因为什么问题?求解答。
-
November 12, 2025 at 9:36 am
Yuanyuan Xiao
Ansys EmployeeHi,
您好,一般来说计算满足以下两种条件的其中一个就会自动终止。
1.迭代步数达到了。
2.计算残差达到了,即收敛了。
我看到您描述说迭代步数是1500而计算700步就终止,很可能是第二种情况,即计算残差达到了。这是正常的计算终止,还请放心😊。
另外,如果可能的话,建议更新一下版本,当前最新版本是2025R2。
以上,希望能帮助到您,谢谢。
-
Viewing 1 reply thread
- 您必须登录才能回复此主题。
Innovation Space
Trending discussions
- Application of EDC occurs flame extinguishing
- 用EDC计算发现燃料不能顺利喷出
- Must EDC model need an initial flow field?
- 热仿真计算收敛
- Difficulty in Complex Source Term Linearization
- Please help me check if there are any issues with the UDF.
- Compile the UDF code and apply it to the DPM.
- Negative droplet growth rate in Fluent wet steam model
- Energy Source Term formulation for multi-component condensation
Top Contributors
-
5059
-
1765
-
1387
-
1248
-
1021
Top Rated Tags
© 2026 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.