TAGGED: Record, record-session, webinar
-
-
June 15, 2023 at 6:52 pmMuhammad ArshadSubscriber
Hello,
I hope this is the most relevant place to ask this question. I was directed to use this forum from support about my request to get a recording of a past webinar. I was supposed to attend it, but unfortunatly was not able to, and am inquiring if it is possible to get a recording of it.
This is the webinar in question: https://www.ansys.com/webinars/base-station-antenna-placement-5g-6g-communications
It pertains to Base-Station Antenna Placement and Operations for 5G/6G Communications.
Apologies if this not the correct location to ask this question. I'm assuming a webinar is an "Ansys Product".
Thank you!
-
June 16, 2023 at 8:18 amRobForum Moderator
You can't get a recording, but you should have received a link to view the recording via a stream. Otherwise, if you register on that page it looks like it'll play the recording.Â
-
June 16, 2023 at 3:05 pmMuhammad ArshadSubscriber
Thank you Rob!
Reregistering for the event provided the link to the stream. Appreciate the help.
-
- The topic ‘Recording of a Past Webinar Available?’ is closed to new replies.
- Speed up simulation in HFSS
- Workbench license error
- ansys fluent error when opening it “unexpected license problem”
- Unexpected error on Workbench: Root element not found.
- not able to get result
- Unable to recover corrupted project in Workbench
- Unattended (silent) installation of 2024R2 & -productfile switch
- Unexpected issues with SCCM deployment of Ansys Fluids and Structures 2024 R1
- Questions and recommendations: Septum Horn Antenna
- AQWA: Hydrodynamic response error
-
1191
-
513
-
488
-
225
-
209
© 2024 Copyright ANSYS, Inc. All rights reserved.