-
-
July 10, 2023 at 11:20 am
PRADEEP VAGHELA
SubscriberI want to restart a LS DYNA mpp simulation, I have d3dump files. It is going to be a simple restart. I have done restarts before due to power failure or other reasons. For some reason, this time it does not work.
I keep getting error code 157.
My expression was : mpiexec -np $NCPU -aa -a "$SOLVER" R=d3dump01 memory=$MEMORY
I made sure that all parameters were kept constant. -
July 11, 2023 at 8:14 am
Surya Prakash
Ansys EmployeeHey Pradeep,
Please check this thread which shows the correct expression -
Error analysis in Ls-Run: exit code 157 (ansys.com)
Cheers,
Surya
Guidelines for Posting on Ansys Learning Forum
-
Viewing 1 reply thread
- The topic ‘Issue in the “Simple Restart” using MPP solver’ is closed to new replies.
Ansys Innovation Space
Trending discussions
Top Contributors
-
3367
-
1050
-
1047
-
886
-
837
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.