We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Innovation Space

FREE STUDENT SOFTWARE

Injection duration and liquid fuel mass injected in DI model in Chemkin-Pro

- July 12, 2023 at 3:49 pm
  
  Madhumitha Rajendran
  Subscriber
  
  Hi,
  How is the injection duration in degrees and total liquid fuel mass injected calculated in the DI model? Is there a formula?
  Also, do you have a mechanism for ammonia combustion in your MFL?
  Thanks!
- July 13, 2023 at 8:23 am
  
  Surya Prakash
  Ansys Employee
  
  Hi Madhumitha,
  
  Can you please check this theory on DI -
  8.4.6. Direct-Injection Diesel Engine Simulator (ansys.com)
  Also please check this link for available MFL - Chapter 2: Overview of the MFL Mechanisms (ansys.com)
  
  Thanks,
  Surya

Viewing 1 reply thread

The topic ‘Injection duration and liquid fuel mass injected in DI model in Chemkin-Pro’ is closed to new replies.

Ansys Assistant

Hey there, you are quite inquisitive!
You have hit your hourly question limit.
Please retry after '10' minutes.
For questions, please reach out to ansyslearn@ansys.com.

RETRY

Are you sure you want to leave? The window will be closed.

OK