How can fix errorsource design for Twin Builder is required to have transient-transient link enabled

- March 9, 2021 at 12:43 pm
  
  jrnithy
  Subscriber
- March 9, 2021 at 9:07 pm
  
  Jose Luis Gonzalez Hernandez
  Ansys Employee
  
  Hello,nCould you provide some background information on what type of simulation (or co-simulation) you are trying to run?nProbably some snapshots of your model. This will help in identifying potential sources of the error.nnThank younJose-Luisn
- March 10, 2021 at 11:52 am
  
  jrnithy
  Subscriber
  
  Hi,nnThanks for your reply.n I am doing cosimulation with twin builder circuit and 2d model.nnnThanks in advancen
- March 11, 2021 at 4:16 pm
  
  Jose Luis Gonzalez Hernandez
  Ansys Employee
  
  It seems the Maxwell design being used is not the right type. Maxwell supports multi design types and settings.nYou need to enable and use a Transient-Transient Link and use a Maxwell design that supports that.nThank younJose-Luisn
- March 12, 2021 at 10:38 am
  
  jrnithy
  Subscriber
  
  Thanks. I done it but error 2 and 3 is persist again...nnI will try to resolve itnnthanks boss..n