-
-
November 30, 2024 at 3:34 pmmhannanSubscriberHello, I am trying to do opthalmological simulation. For the thin tissues of eye, I have to define fiber reinforced material model "Mooney-Rivlin Von Mises Distributed Fibers".Âwhere,Âc1= Mooney-Rivlin coefficient 1c3= Exponential stress coefficientc4= Fiber uncrimping coefficientkf= Fiber concentration factorÂAnd I have to define biphasic material property with below coefficient:Solid volume fraction: 0.55
Solid matrix:Â Neo-Hookean
Elastic modulus= 0.06 MPa
Poisson’s ratio= 0
Permeability= 45037 mm2/MPa.sÂHow can I define this model in ansys?? -
December 2, 2024 at 3:12 amAshish KhemkaForum Moderator
Hello,
This query seems to be duplicated of:Â Help in defining reinforced material model in ansys.
I will close the current post.
Regards,
Ashish Khemka
-
Viewing 1 reply thread
- The topic ‘Help in defining reinforced material model in ansys.’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- Problem with access to session files
- Ayuda con Error: “Unable to access the source: EngineeringData”
- At least one body has been found to have only 1 element in at least 2 directions
- Using APDL to extract stresses on a beam element.
- How to select the interface delamination surface of a laminate?
- Geometric stiffness matrix for solid elements
- Error when opening saved Workbench project
- Timestep range set for animation export
- Computation Accleration
- SMART crack under fatigue conditions, different crack sizes can’t growth
Top Contributors
-
1161
-
488
-
486
-
225
-
201
Top Rated Tags
© 2024 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.