FSAE CFD – Lesson 1 Preparation question (Using Discovery)

[kelvin.k.kong]

Dear Ansys staff and fellow users,

In regards to the External Aerodynamic Analysis of an FSAE Car Using Ansys CFD series, Lesson 1, at about 10:07min into the video:

&list=PLtt6-ZgUFmMLjplzWHZ9aObvd3n9_sBQ9&index=2

The video doesn't explain in clearly how to fill the surface in between the rim and the wheel (assuming you have you), along with removing sharp corners at the flange of the rim .

Here is the wheel from my car model I'm working on:

Thanks,

Kelvin