We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
LS Dyna

LS Dyna

Topics related to LS-DYNA, Autodyn, Explicit STR and more.
  1. All Channels
  2. LS Dyna
  3. Frictional contact error

Frictional contact error

    • May 20, 2024 at 8:10 pm
      Michael Warfield
      Subscriber

      Hi, I'm trying to setup a frictional contact between the burr and the middle section of block here. I can select faces or the entire body of the block, but I cannot select the faces or body of the burr. Anytime I do, the contact remains highlighed yellow and I cannot create the Conection. Any ideas on how to fix this?

    • May 21, 2024 at 1:33 pm
      Ram Gopisetti
      Ansys Employee

      Hi Michael, 

      Can you try flipping the contact and target parts? and see if that works. 

      Cheers, Ram 

Viewing 1 reply thread
  • The topic ‘Frictional contact error’ is closed to new replies.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.