Failure at a Cosimulation between Simplorer and Maxwell

- July 18, 2018 at 3:11 pm
  
  Sebastian
  Subscriber
  
  Hello,
  
  I want to do a Transient Co-Simulation between Simplorer and Maxwell. I coupled the Systems threw loading the Maxwell Project as a Sub-System and connected the ports to the sources. Now I get the following notification: (please also see the attached picture)
  
  Cannot open file extnlckt.par
  
  What could be the problem here?
  
  Thank you very much for your help in advance
  
  Regards,
  
  Sebastian
- July 18, 2018 at 3:13 pm
  
  Sebastian
  Subscriber
  
  Due to the fact that my Maxwell System has many In and Outputs I used page connectors to connect the wires.