-
-
November 15, 2024 at 1:49 am
alexander.osters
SubscriberHello,
im currently working on a setup for a steady cornering simulation with the domain as Moving Reference Frame.
There seems to be a problem with my boundary conditions as the velocity profile of the domain and the massflow do not really make sense.
Boundary Conditions are:
Cell Zone: Frame Motion with rotational velocity
Inlet: Velocity Inlet with 0 m/s - Reference Frame: Relative to Adjecent Cell Zone
Outlet: Pressure Outlet - Reference Frame: Relative to Adjecent Cell Zone
Walls: Specific Shear set to 0 - Reference Frame: Relative to Adjecent Cell Zone
Floor: moving wall: rotational with 0 rad/s - Reference Frame: Relative to Adjecent Cell Zone
Any ideas what Im doing wrong here?
-
November 21, 2024 at 12:29 pm
Essence
Ansys EmployeeHello,
How is the mesh? Is the quality good? Also, keep in mind about the refinement and coarsenment at required regions.
-
- You must be logged in to reply to this topic.
- Autodesk Inventor, ANSYS add-in
- Publishing with Student License or Academic Edition
- Failed to generate surface mesh
- Help with “Invalid Ply” Error
- In Ansys fluent i don’t have ribbon option, could someone please help me.
- An error occurred when the post processor
- Graduate Student Project Help: Existing File Availability
- Finding maximum flaw size then relative flaw size Ansys Granta synthesizer.
-
2788
-
965
-
851
-
599
-
591
© 2025 Copyright ANSYS, Inc. All rights reserved.