Learning Forum

[ashishkumar.gupta]

I have created a small DGBB model as shown below. I want to see Contact stresses/pitting on the races. Due to lubricant flow, there is always lubricnat between ball and race. There is no Frictional contact.

So I was working on 2 way FSI. But now I am confused where this idea is implementable in 2 way FSI or should i do sowmthing else. As I newbie here (especially in Fleunt), I would need some concrete opion on what excatcly should I do so to check the effect of FLUID on SOLID Races. All my bodies are Deforming with fine meshes/inflation at the contact.

[Rob]

https://innovationspace.ansys.com/forum/forums/topic/tutorial-or-help-for-2-way-fsi/