-
-
July 20, 2021 at 1:20 pmTaoZhanpingSubscriber
I'd like to run autodyn in parallel in WIN10. However,when I use Intel MPI, it appears the problem as picture showed.Is there anything wrong?Thank you!
July 27, 2021 at 6:43 pmKaiAnsys EmployeeHi, you can find guideline in Ansys Help. Autodyn Parallel Processing Guide -> 3 Establish a parallel processing environment -> 3.1.1Running Autodyn with Intel MPI
Viewing 1 reply thread- The topic ‘AUTODYN Parallel Processing Problem’ is closed to new replies.
Ansys Innovation SpaceTrending discussions- LS-DYNA Installation Issues with Student Workbench 2024 R2
- Mathematical model generation stuck at 10%
- About combine different unconnected body into one part
- Cross-coupled stiffness elements in LS-DYNA
- LS-Dyna CESE SMP d vs MPP d solver
- CESE solver – Ignition mechanism
- Initial Stress Shell Application and HistVarCosine in LS-DYNA
- shape memory alloy material in LS-DYNA
- *** Error 40058 (SOL+58) retractor 1000002:convergence failure at time1.01E+02
- MAT072R3- concrete damage rel3 validation
Top Contributors-
1492
-
599
-
591
-
591
-
366
Top Rated Tags© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
-
The Ansys Learning Forum is a public forum. You are prohibited from providing (i) information that is confidential to You, your employer, or any third party, (ii) Personal Data or individually identifiable health information, (iii) any information that is U.S. Government Classified, Controlled Unclassified Information, International Traffic in Arms Regulators (ITAR) or Export Administration Regulators (EAR) controlled or otherwise have been determined by the United States Government or by a foreign government to require protection against unauthorized disclosure for reasons of national security, or (iv) topics or information restricted by the People's Republic of China data protection and privacy laws.