ansys maxwell – induced voltage

- January 10, 2019 at 12:42 pm
  
  ebbiecrikee
  Subscriber
  
  Hi everyone,
  
  I wanted to measure the induced voltage across 2 terminal of helix coil with magnet moving (translation motion) in the coil.
  
  could someone please help me?
  
  thanks
- February 6, 2023 at 11:33 pm
  
  zkli
  Subscriber
  
  You can assign winding to the terminal of helix coil with 0 voltage setting, and 2 terminal should be assigned excitations.
  Right click Excitation -> add winding -> type: voltage, resistance: >0, inductance: >0.
  Right click Excitation -> assign -> coil terminal
  Right click winding1 and winding2 -> assign col terminal...