-
-
November 30, 2024 at 3:34 pm
mhannan
SubscriberHello, I am trying to do opthalmological simulation. For the thin tissues of eye, I have to define fiber reinforced material model "Mooney-Rivlin Von Mises Distributed Fibers".Âwhere,Âc1= Mooney-Rivlin coefficient 1c3= Exponential stress coefficientc4= Fiber uncrimping coefficientkf= Fiber concentration factorÂAnd I have to define biphasic material property with below coefficient:Solid volume fraction: 0.55
Solid matrix:Â Neo-Hookean
Elastic modulus= 0.06 MPa
Poisson’s ratio= 0
Permeability= 45037 mm2/MPa.sÂHow can I define this model in ansys?? -
December 2, 2024 at 3:12 am
Ashish Khemka
Forum ModeratorHello,
This query seems to be duplicated of:Â Help in defining reinforced material model in ansys.
I will close the current post.
Regards,
Ashish Khemka
-
Viewing 1 reply thread
- The topic ‘Help in defining reinforced material model in ansys.’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- At least one body has been found to have only 1 element in at least 2 directions
- Error when opening saved Workbench project
- How to apply Compression-only Support?
- Geometric stiffness matrix for solid elements
- Frictional No separation contact
- Image to file in Mechanical is bugged and does not show text
- Timestep range set for animation export
- Script Error Code:800a000d
- Elastic limit load, Elastic-plastic limit load
- Element has excessive thickness change, distortion, is turning inside out
Top Contributors
-
1406
-
599
-
591
-
550
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.