TAGGED: ansys-hfss, capacitance
-
-
August 27, 2024 at 12:35 am
-
August 27, 2024 at 8:15 pm
Stefano R
SubscriberI found some Capacitance values for this structure using Q3D but HFSS is giving completely different results, so I want to find the capacitance from the HFSS fields. I can do C = Q/V with V= Line integral of the Electric field and Q as the Abs_Q value in the fields calculator. But I am unsure if this is the correct approach.
Â
-
August 27, 2024 at 8:15 pm
Stefano R
SubscriberI found some Capacitance values for this structure using Q3D but HFSS is giving completely different results, so I want to find the capacitance from the HFSS fields. I can do C = Q/V with V= Line integral of the Electric field and Q as the Abs_Q value in the fields calculator. But I am unsure if this is the correct approach.
Â
-
September 16, 2024 at 1:55 pm
Aymen Mzoughi
Ansys EmployeeQ3D is the tool to use for this case
-
- You must be logged in to reply to this topic.
- Y wiring method and the start and end points of winding.
- Lumped Port Deembed
- Optimizing Via Impedance in Ansys HFSS 3D Layout Using Geometric Parameter Sweep
- HFSS libnvidia-ml.so too old or could not be found – Warning in slurm job output
- Hfss 3D pcb via capped and filled with epoxy
- AEDT Natural Convection with default correlation is failing solver initializatio
- Three-Phase Voltage Imbalances in dual stator electric generator
- STL Import Errors in HFSS After Cleaning in SpaceClaim
- Calc Error in Field Calculator after PyAEDT Analyze
- import file autocad 3d
-
3912
-
1414
-
1256
-
1118
-
1015
© 2025 Copyright ANSYS, Inc. All rights reserved.