Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.

Innovation Space

FREE STUDENT SOFTWARE

Meshing the thin plate with hole

- February 26, 2024 at 10:17 am
  
  Jerzy Nawrocki
  Subscriber
  
  Good morning to everyone,
  I've just encountered the mesh problem. I would like to kindly ask for tips how to rise the quality of the mesh. Thanks in advance.
- February 26, 2024 at 11:17 am
  
  Rob
  Forum Moderator
  
  Best guess is that you've used too many fixed local sizings combined with too large a smallest cell size. Do the tubes touch the plate or are they fully enclosed?
- February 26, 2024 at 11:26 am
  
  Jerzy Nawrocki
  Subscriber
  
  No, there is a gap between bottom of tube and bottom of thin plate.
  When I used mesh only it's failed
- February 26, 2024 at 11:56 am
  
  Rob
  Forum Moderator
  
  How does the minimum cell size compare to the gap between the hole/tube and the plate?
- February 26, 2024 at 12:14 pm
  
  Jerzy Nawrocki
  Subscriber
  
  The gap is 1 mm. The minimum cell size is 20 mm.
- February 26, 2024 at 1:11 pm
  
  Rob
  Forum Moderator
  
  OK, so how do you expect to resolve the gap with a 20mm cell?
- February 26, 2024 at 5:29 pm
  
  Jerzy Nawrocki
  Subscriber
  
  Thanks Rob,
  I’ve got lost this Monday… Now is OK.

Viewing 6 reply threads

The topic ‘Meshing the thin plate with hole’ is closed to new replies.

[bingo_chatbox]