Installation complete with errors

- October 31, 2021 at 2:17 pm
  
  Conorg123
  Subscriber
  
  HI, I keep getting errors when trying to redownload Ansys. I had the 2019 version on my SSD and i deleted it off my laptop. I re-downloaded the 2021 R2 onto my external hard drive and i am getting these errors. Any help is greatly appreciated
  Date verification complete...No conflicts found.
  
  The installation will copy the prerequisite setup files from the media in case you need to reconfigure later or if you need to configure client machines for products installed to a network share.
  This may take a while ...
  Successfully copied prerequisites from media.
  
  You don't need to install any prerequisites.
  
  Reading the installation media contents - please wait.
  
  Extraction: D:Ansysinstcore clCOMMON.TGZ ...
  Extraction: D:Ansysinstcore clWINX64.TGZ ...
  Extraction: D:AnsysstudentWINX64.7z ...
  Extraction: D:AnsyslicenseWINX64.7z ...
  RSS is disabled
  
  Performing licensing configuration via the following command...
  "D:AnsysANSYS IncANSYS StudentShared Filesinwinx64 clsh.exe" "D:AnsysANSYS IncANSYS StudentShared FilesLicensinglicadminscriptsLicAdminMain.itcl" -silentinstallclient -release "2021 R2" -lang en-us
  
  Licensing configuration has completed.
  
  Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigCommon.exe
  Configuring ANSYS TurboGrid ...
  
  Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigTG.exe
  Creating Start Menu items for Ansys client licensing ...
  Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigWB.exe
  Running "D:AnsysANSYS IncANSYS Studentv212RSMinAnsConfigRSM.exe" -encodingUTF8
  
  couldn't execute "D:AnsysANSYS IncANSYS Studentv212RSMinAnsConfigRSM.exe": no such file or directory
  Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigANSYS.exe
  Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigAQWA.exe
  Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigCFX.exe
  Configuring ANSYS Viewer ...
  Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigSpaceClaim.exe
  Configuring ACP ...
  
  Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigACP.exe
  Configuring Help ...
  
  Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigHelp.exe
  
  couldn't execute "D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigHelp.exe": no such file or directory
  
  ANSYS Internet Doc has been configured.
  Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigCHEMKIN.exe
  Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigFORTE.exe
  Configuring EnSight ...
  
  Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigEnsight.exe
  Running D:AnsysANSYS IncANSYS Studentv212commonfilesconfigswinx64configAnsConfigFENSAP.exe
  
  Successfully created file associations.
  
  The installation completed with warnings/errors. Review any .err or .log files in:
  D:AnsysANSYS IncANSYS Student
- November 1, 2021 at 11:29 am
  
  ANSYS_MMadore
  Ansys Employee
  
  Please run the uninstall for v212, C:\Program Files\ANSYS Inc\ANSYS Student\v212\Uninstall.exe
  Next, delete C:\Program Files\ANSYS Inc\ANSYS Student\v212\, also delete %APPDATA%\Ansys\v212
  Try to download another copy of the installer, extract the .zip file and then run the setup.exe making sure to right-click -> Run as administrator.