Current Status
Price
Get Started
This workshop focuses on simulating an microstrip trace with stub connected to a SMA connector using Ansys HFSS™ high-frequency electromagnetic simulation software. You will learn how to insert 3D components, assign boundaries, create lumped ports, define radiation regions, and set up parametric sweeps. It covers analyzing S-parameters for different positions of the stub along the trace. It also covers visualizing surface current distributions to view the electromagnetic field propagation along the traces.
Learning Outcomes:
Following completion of this workshop, you will be able to:
- Integrate 3D components into HFSS designs.
- Assign boundaries and ports open transmission line configurations.
- Configure analysis setups including HPC options and frequency sweeps.
- Perform parametric studies to evaluate design variations.
- Interpret S-parameter plots for bandwidth and resonance behaviour.
- Visualize surface current distributions for better understanding of RF performance.
- Optimize stub position for desired frequency response.
Prerequisites:
- Getting Started with HFSS Software course.
Certification Content
You are being redirected to our E-commerce site to provide you an optimal buying experience experience. Please refer to our FAQ page for more details. Click this link to proceed.
