This tutorial demonstrates the end-to-end workflow of using Ansys Fluent® fluid simulation software GPU solver to model the transient, turbulent (scale resolving), multispecies heat transfer problem representing the injection of a cryogenic gas in a general set up. The geometry, process conditions, material properties are generic. Emphasis is on the simulation process in terms of set up and post-processing.
Learning Outcomes:
Following completion of this tutorial, you will be able to:
- Set up a transient, multispecies case in the Ansys Fluent GPU solver, from geometry import through boundary and material definition.
- Configure scale-resolving turbulence models appropriate for cryogenic gas injection and understand when they outperform RANS.
- Define species transport and heat transfer physics for a cryogenic jet mixing into a warmer ambient stream.
- Run and monitor a GPU-accelerated transient solution, selecting time step size, convergence criteria, and data sampling settings.
- Post-process and interpret the results, extracting temperature, species concentration, and mixing behavior over time.
Prerequisites:
- General familiarity with Ansys Fluent is software assumed.
Please note: These training materials were developed and tested in the 2026R1 release.
-
Cost: $450.00
- Course Duration: 4-6 HOURS
- Skill Level: Expert
- Skills Gained: Fluent Setup, Turbulence Modeling, Thermal Analysis, Heat Transfer
No reviews available for this learning resource.
