General

General

  1. All Categories
  2. Fluids - General
  3. I am trying to use selective body meshing and I created a meshing worksheet with the meshing order for different bodies. Despite this, I still get the following warning message: “The selective body meshing is not being recorded, so the meshing may not be persistent on an update. If you want to record the order of the body meshing, please use the Mesh Worksheet to track the meshing steps. Please see Selective Meshing documentation for more details.” It looks like ANSYS Meshing does not recognize my worksheet. How to fix the issue?

I am trying to use selective body meshing and I created a meshing worksheet with the meshing order for different bodies. Despite this, I still get the following warning message: “The selective body meshing is not being recorded, so the meshing may not be persistent on an update. If you want to record the order of the body meshing, please use the Mesh Worksheet to track the meshing steps. Please see Selective Meshing documentation for more details.” It looks like ANSYS Meshing does not recognize my worksheet. How to fix the issue?

Tagged: 17.2, fluid-dynamics, General, meshing
    • June 5, 2023 at 7:06 am
      FAQFAQ
      Participant

      The problem is that some swept bodies in the geometry are excluded from the Worksheet. Swept bodies in contact with tet meshed bodies are always meshed first, so these are being meshed in conjunction with the other bodies in the Worksheet. Because the order in which these swept bodies are meshed depends on the sizings and methods used in adjacent bodies, meshing is not necessarily persistent, and the warning message gets issued.

Featured Articles

Introducing Ansys Electronics Desktop on Ansys Cloud

The Watch & Learn video article provides an overview of cloud computing from Electronics Desktop and details the product licenses and subscriptions to ANSYS Cloud Service that are...

How to Create a Reflector for a Center High-Mounted Stop Lamp (CHMSL)

This video article demonstrates how to create a reflector for a center high-mounted stop lamp. Optical Part design in Ansys SPEOS enables the design and validation of multiple...

Introducing the GEKO Turbulence Model in Ansys Fluent

The GEKO (GEneralized K-Omega) turbulence model offers a flexible, robust, general-purpose approach to RANS turbulence modeling. Introducing 2 videos: Part 1 provides background information on the model and a...

Postprocessing on Ansys EnSight

This video demonstrates exporting data from Fluent in EnSight Case Gold format, and it reviews the basic postprocessing capabilities of EnSight.

© 2024 Copyright ANSYS, Inc. All rights reserved.