-
-
September 11, 2023 at 6:03 pm
-
September 11, 2023 at 7:13 pm
Damian Rodolfo
SubscriberI was able to solve the issue by just creating a fresh equivelent stress. I still have no idea why it was there in the first place so if anyone knows I'd love to know why.
-
September 11, 2023 at 11:13 pm
Ankush Choudhary
Ansys EmployeeHi Damian,
A change to the visibility of a part, displaying all parts again for example, or removing parts from the current display, adds the label "Custom Obsolete" to the legend annotation information. This indicates that the custom display is no longer accurate. It is displaying the values of the previous display (legend colors and values, the Min and Max values and annotation location, etc.), shown above, associated with a part being hidden. You need to select the Adjust to Visible option again to re-display the contours or select the Reset All option to display the original contours.
-
- The topic ‘Why does it say “Custom Obsolete” in the legend of my stress analysis?’ is closed to new replies.
- At least one body has been found to have only 1 element in at least 2 directions
- Script Error Code:800a000d
- Element has excessive thickness change, distortion, is turning inside out
- Help to do quasistatic analysis in static structural module
- Image to file in Mechanical is bugged and does not show text
-
1987
-
896
-
599
-
591
-
408
© 2025 Copyright ANSYS, Inc. All rights reserved.