-
-
November 11, 2020 at 8:54 pmwyattSubscriberNovember 13, 2020 at 5:30 pmChris QuanAnsys EmployeeMesh should be very fine to take the small wear amount into account. Failure model has to be applied to the material in Engineering Data to initiate the wear (material failure). Erosion model needs to be activated in Analysis Settings to remove the failed materials (Erosion by Material Failure = Yes).nViewing 1 reply thread
- The topic ‘What is your feedback on this wear scenario simulation?’ is closed to new replies.
Ansys Innovation SpaceTrending discussions- LS-DYNA Installation Issues with Student Workbench 2024 R2
- About combine different unconnected body into one part
- Mathematical model generation stuck at 10%
- Cross-coupled stiffness elements in LS-DYNA
- LS-Dyna CESE SMP d vs MPP d solver
- CESE solver – Ignition mechanism
- Initial Stress Shell Application and HistVarCosine in LS-DYNA
- shape memory alloy material in LS-DYNA
- CESE combustion model
- Problem with working out the CESE LS-Dyna model
Top Contributors-
1416
-
599
-
591
-
565
-
366
Top Rated Tags© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
-
The Ansys Learning Forum is a public forum. You are prohibited from providing (i) information that is confidential to You, your employer, or any third party, (ii) Personal Data or individually identifiable health information, (iii) any information that is U.S. Government Classified, Controlled Unclassified Information, International Traffic in Arms Regulators (ITAR) or Export Administration Regulators (EAR) controlled or otherwise have been determined by the United States Government or by a foreign government to require protection against unauthorized disclosure for reasons of national security, or (iv) topics or information restricted by the People's Republic of China data protection and privacy laws.