We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Wear simulation

Wear simulation

    • May 12, 2024 at 6:40 am
      s310413
      Subscriber

      Hi everyone,

      Is there a way to simulate wear of a cylinder on flat specimens subjected to normal load and cyclic displacement (18 000 cycles)? I tried a static structural analysis defining sinusoidal displacement (20 Hz frequency) for 900 s but the simulation is stuck at 1%. Any ideas? Thanks

       

    • May 13, 2024 at 10:46 am
      Ashish Khemka
      Forum Moderator

      Hi,

      Please see if the following video on YouTube titled - 'Application Focus: Contact Wear Simulation' helps.

      Regards,

      Ashish Khemka

      • May 13, 2024 at 12:42 pm
        s310413
        Subscriber

        Thanks but it doesn't help sadly :(

Viewing 1 reply thread
  • The topic ‘Wear simulation’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.