User Defined Result in beam connection

- October 16, 2024 at 5:24 pm
  
  javat33489
  Subscriber
  
  Hello everyone.
  
  Please tell me how to display voltages in beam connection (circular)? I specified a bolt, made a calculation. I need to see the voltages there. Will it be an APDL snippet or User Defined Result?
  I would like to use User Defined Result, what will it look like?
- October 17, 2024 at 7:00 am
  
  Erik Kostson
  Ansys Employee
  
  Hi
  So other forum members can provide some feedback – explain more (so voltages on beam connections – beams do not have a voltage dof).
  Do you mean something else than voltage perhaps, stress say. Then search and you will find – try search: beam connections and stress and ansys)?
  All the best
  Erik
- October 17, 2024 at 6:15 pm
  
  javat33489
  Subscriber
- October 18, 2024 at 7:13 am
  
  Erik Kostson
  Ansys Employee
  
  Hi
  To complete and for reference below are some links that show how to get forces and also stresses in beam connections.
  
  https://innovationspace.ansys.com/forum/forums/topic/beam-connection-stress/
  
  Force:
  https://innovationspace.ansys.com/forum/forums/topic/beam-connection-stress/
  Stress
  https://innovationspace.ansys.com/knowledge/forums/topic/how-to-plot-stresses-of-a-beam-connection-in-workbench/
  All the best
  Erik
  Closing as this might be useful to others