Fluids

Fluids

Topics related to Fluent, CFX, Turbogrid and more.
  1. All Channels
  2. Fluids
  3. “transient initialisation override = t”

“transient initialisation override = t”

    • March 20, 2020 at 7:13 am
      jmperido1
      Subscriber

      Good day, I've been trying to simulate an airflow in a chamber using CFX. But a message about ""transient initialisation override = t" pops up. Can you help me solve this

    • March 20, 2020 at 7:30 am
      Amine Ben Hadj Ali
      Ansys Employee

      You need to provide a start value for pressure in your domain.

    • March 20, 2020 at 1:18 pm
      jmperido1
      Subscriber

      Sir I've tried providing values for pressure but there is still the same error.


    • March 20, 2020 at 1:22 pm
      jmperido1
      Subscriber

      Sir I've tried providing values for pressure but there is still the same error.


    • March 20, 2020 at 1:26 pm
      jmperido1
      Subscriber

      Sir I've tried providing values for pressure but there is still the same error.



       

    • March 20, 2020 at 2:02 pm
      Amine Ben Hadj Ali
      Ansys Employee

      You need to provide values at the initialization level.

    • March 21, 2020 at 2:43 am
      jmperido1
      Subscriber

      Sir, good day. Thanks for the solution. I have another problem regarding velocity.



Viewing 6 reply threads
  • The topic ‘“transient initialisation override = t”’ is closed to new replies.
Innovation Space
Top Contributors

© 2026 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.