We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Innovation Space

FREE STUDENT SOFTWARE

the Non-reflective boundary condition, but Non-reflective boundary condition doe

- September 11, 2024 at 9:29 am
  
  Tim T
  Subscriber
  
  I used "BOUNDARY SALE MESH FACE "to set the Non-reflective boundary condition, but Non-reflective boundary
  condition does not take effect. What should I do to resolve the problem?
- September 12, 2024 at 5:14 pm
  
  Ian Do
  Ansys Employee
  
  Hi,
  Non-reflective boundary condition (NRBC) does not have an easy solution because waves can behaves in complex manners when they hit the boundaries. Efforts to dampen out these waves have limited efficiency. NRBC MUST be applied to a free boundary face FAR away from the P source. If it is too close to the P source, it cann not dampen out high magnitude P pulse. So you should do a simple 1 row model, trying to propagate a p pulse. Then make this row longer and longer and apply the same input to find out how far away (from the P source) you need to have for this NRBC to work effectively. Then apply that to your model.
  Ian Do
  - September 13, 2024 at 9:26 am
    
    Tim T
    Subscriber
    
    Thank you!

Viewing 1 reply thread

You must be logged in to reply to this topic.