-
-
July 5, 2024 at 3:07 am
994724614
SubscriberPlease ask teachers, because the use of MODE and FDTD for microring simulation, the time is very large. Under the premise of ensuring that the simulation results are more accurate, how to set up to greatly reduce the simulation time?
-
July 5, 2024 at 8:39 pm
Guilin Sun
Ansys EmployeePlease refer to the reply from the Chinese post.
-
Viewing 1 reply thread
- The topic ‘simulation time’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- Difference between answers in version 2024 and 2017 lumerical mode solution
- Errors Running Ring Modulator Example on Cluster
- Import material .txt file with script
- Absorption cross-section of AuNR excited by prism-based TIR
- Issues with getting result from interconnent analysis script
- How to measure transmission coefficients on a given plane .
- Topology Optimization Error
- Edge Coupler EME Example Issue
- FDE : Simulation waveguides with electrodes
- TE Polarization Fraction + Waveguide TE/TM Fraction
Top Contributors
-
1987
-
896
-
599
-
591
-
408
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.