-
-
May 21, 2024 at 1:10 amLearner ShaoSubscriber
请问一下,在使用S参数分析组的时候,重新设置光源和监视器之间的距离,以及光源到超表面的距离,会不会导致结果不准确?
-
May 27, 2024 at 3:46 amguanyo.dongSubscriber
您好
S參數分析組裡面,有把您上述提到的距離導致的相位累積給扣除了,所以應該是不會!
如果您現在的結果根據這些距離有影響,建議您檢查一下邊界條件,可能有反光跟直接透過的光相干了
莎益博,董冠佑
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
Top Contributors
-
861
-
427
-
367
-
225
-
201
Top Rated Tags
© 2024 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.