Learning Forum

[Preeti]

[ANSYS_MMadore]

Can you tell which HPC license you have access to on your license server? Is it anshpc, anshpc_pack, hfsshpc or hfsshpc_pack?
Please adjust your HPC and Analysis Options -> Options to select the appropriate setting for your HPC type.
ANSHPC: HPC License type=Pool; Use legacy Electronics HPC License=False
ANSHPC_PACK: HPC License type=Pack; Use legacy Electronics HPC License=False
HFSSHPC: HPC License type=Pool; Use legacy Electronics HPC License=True
HFSSHPC_PACK: HPC License type=Pack; Use legacy Electronics HPC License=True

[Preeti]

Dear Sir Thank you so much for your help.
Although, I was not able to find out which HPC License I have access to, on my license server (not able to find the option). But, as suggested by you, I have tried changing the following setting "Use legacy Electronics HPC License = TRUE", it worked and I got the simulated results.
I would appreciate if you can tell the reason behind the requirement of above settings. This is because, earlier I was successfully running my other simulations in HFSS, when this setting was FALSE. So, that I can get better insight to when these settings are required to be done.
Regards
Preeti

[ANSYS_MMadore]

Perhaps the license on the server has change, requiring the change to your settings.

[Preeti]

Thank you sir, once again. Your help at every stage is highly appreciated.