presentation of results Ansys Workbench

- May 24, 2020 at 3:55 pm
  
  Tom23
  Subscriber
  
  Hello everybody,
  
  I have a simulation model with some components. I am only interested for the results of one component and I know how I can only get this results.
  My questions is if it is possible to show the reults of this one component and also the geometry (not the reults!) of the other components. The position of my components is important to show.
  
  Thank you!
- May 26, 2020 at 5:16 pm
  
  Neelkolekar
  Subscriber
  
  Hi,
  
  For this you have to select the one component by scoping method -> geometry and then pick the required body who's results you need, plot the results and then select all bodies from result tab.
  
  Done.!
  
  -Swapnil.
- May 31, 2020 at 8:33 am
  
  Tom23
  Subscriber
  
  Thanks a lot!
- May 31, 2020 at 1:41 pm
  
  peteroznewman
  Subscriber
  
  Tom23,
  
  Please don't delete this discussion.
  
  The answer above may be useful to others who have the same question and they can find it here. This will save everyone some time, but not if you delete it.
  
  I was disappointed to find you deleted your previous discussions, which I had invested my in time answering.