Point data

- September 22, 2023 at 4:23 am
  
  Bill Tapp
  Subscriber
  
  I have a thesis project using LS-DYNA 2023. I am attempting to use a single point of reference on a 3d solid plate and see the stress of it over time (cannot select surface). I have tried using named selections and coordinate system to highlight the point i want with no success. I have done similar things with fluent before but cannot seem to make this work. Sorry if my explaining is bad
- September 22, 2023 at 9:50 am
  
  Sampat Kumar
  Ansys Employee
  
  Hi Bill,
  Do you want to see the stress variation over time at a specific point?
  
  Regards,
  Sampat
  - September 24, 2023 at 3:24 am
    
    Bill Tapp
    Subscriber
    
    Yeh mate thats exactly what i want. Like be able to export a data table of stress vs. time on a selected point
  - September 25, 2023 at 11:11 pm
    
    Bill Tapp
    Subscriber
    
    Is there an easy way to do this?
    - September 30, 2023 at 2:41 pm
      
      Sampat Kumar
      Ansys Employee
      
      Hi Bill,
      you can try the way that I have explained in the Attached forum thread!
      /forum/forums/topic/stress-data-point/
      
      Regards,
      Sampat