Learning Forum

[caoyangui1986]

As shown in figure 1, the power supply path: VRM -- -- -- -- -- - where v0 N500745-1 -- -- -- -- -- -- AR_1P0_RF -- -- -- -- -- -- -- -- ICchip  

as show Figure 2 shall i to generate an EXTENDED NET from N500745, 1V0, AR_1P0_RF

Figure 3. Following the wizard will automatically check these three networks for me

• The simulation results are shown as fig4
• the fig can refer to below

[Praneeth]

Kindly go through the following link for detailed information on PDN - Ansys Electronics 2022 R1 - Running Simulations.
All the very best Praneeth.