TAGGED: ansys-maxwell, eddycurrent
-
-
January 2, 2025 at 10:46 amV.duylk1Subscriber
Hi everyone.
The phase of B at the airgap should be delay due to eddy current effect.
I try to simulate the phase shift of B at the airgap. However, when i plot B over phase with different frequency. There is a problem.
Sometimes, the result shows that B does have the phase shift. sometimes is not.
Can anyone help me address this problem.
 -
January 3, 2025 at 2:50 pmMiranda HourihanAnsys EmployeeHi, what's the difference between those two Mag_B plot, location?
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- HFSS Incident Plane Wave excitement mode
- How to calculate eddy and hysteresis losses of the core?
- Ansys Maxwell 3D – eddy current
- Simulation of capacitor combining eddy currents with displacement currents
- dq graph non-conformity
- Simplorer+Maxwell Cosimulation results and Maxwell results mismatch
- Parametrizing coil “terminals” with coil geometry
- On-chip inductor design
- Maxwell circuit – PWM
- Calculating E-field tangential to a 2D resonant structure on a sapphire chip
Top Contributors
-
1617
-
613
-
599
-
591
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.