3D Design

3D Design

Topics related to Ansys Discovery and Ansys SpaceClaim.

Parametric circular pattern

TAGGED: 

    • a.montes
      Subscriber

      Hi,

      Is it possible to create a parameter with the number of copies in a circular pattern? See image below for reference:

       

      Regards,

      Antonio

    • Devendra Badgujar
      Forum Moderator

      Hello, 

      Yes, you can do this using history tracking. You will have to first start History tracking before this step so that this geometry operation is recorded in blocks. You will than get option to parametrize number of copies. History Tracking in ANSYS Discovery - Ansys Knowledge

      Let me know if this helps. Thanks! 

      Regards,

      Devendra 

    • antoniogutgon
      Subscriber

      Hi Devendra,

      It seems that you can change and parameterize the circular pattern once it has been created. Below is a reference image.

      Could you confirm that this is correct and that therefore it would not be necessary to use History Tracking?

      Best regards,

      Antonio

    • Devendra Badgujar
      Forum Moderator

      Hello Antonio, 

      Yes, this is also a one of the approach of doing this. The parameters tab will be available once you have created the pattern:

      Regards,

      Devendra 

Viewing 3 reply threads
  • You must be logged in to reply to this topic.