Not getting the Power using Simplorer/Twin Builder- Wireless Power Transfer

- July 24, 2023 at 3:23 am
  
  Waqas
  Subscriber
  
  Hello, I have raised some questions regarding Simplorer/Twin Builder in the recent past but havent gotten satisfactory results or answers. i am trying to do a co simulation of a Wireless Power Transfer in the Twin builder.
  I am using a frequency of 85k. I am attaching picctures for reference. I am a student and in need of help.
  
  Best,
  Waqas
- July 28, 2023 at 6:02 am
  
  Waqas
  Subscriber
  
  Support from ANSYS team would be greatly appreciated.
- August 2, 2023 at 7:56 am
  
  Ting Han Wang
  Subscriber
  
  請問你後來有找到解決方法嗎? 我跟你一樣功率也只有nW
  - August 7, 2023 at 2:56 am
    
    Waqas
    Subscriber
    
    I also have a very low output power.
- August 4, 2023 at 6:16 pm
  Jingchen Liang
  Ansys Employee
  Hi,
  Would you please check:
  1. Calculate and add the correct resonant capacitance, equivalent series resistance and coil DC resistance in series with coils.
  2. Select "Maxwell Eddy Current Link - RLGC Parameters" link type when creating Maxwell Eddy Current Dynamic Coupling.
  3. Use sinusodial voltage source.
  4. Expand the frequency sweep ragne (e.g. 50kHz - 200kHz).
  - August 7, 2023 at 2:59 am
    
    Waqas
    Subscriber
    
    Hi Jingchen Liang,
    
    I have tried several voltage sources to rectify the problem, but no luck. Will it be possible, if you could attach a picture and the specifications of the voltage source to which you are referring to, that would be hugely helpful.
    
    Thanks in advance