We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
Fluids

Fluids

Topics related to Fluent, CFX, Turbogrid and more.
  1. All Channels
  2. Fluids
  3. Need tutorial files for simulation in forte

Need tutorial files for simulation in forte

    • October 27, 2017 at 10:53 am
      rkgupta369
      Subscriber

      Hello,


      everyone, i want to form a simulation on DI diesel engine for my course project in my college. For this purpose, i wanted to learn simulation in ANSYS Forte. i got the file in which tutorials steps are given, but file "(demo_eng.x_t and lift.prof)" used in the simulation are available for their licensed customers.


         I am requesting to all license user that if you have 5-10 mins of your time. then please send me this file on my email at


      it would hard affect you, but to me it would be a life save


      To access tutorials and their input files on the ANSYS Customer Portal, go to
      http://support.ansys.com/training.


      I would really appreciate any help from this community.

    • January 29, 2018 at 10:37 pm
      Garrystone123
      Subscriber

       Hi rkgupta369, did you manage to locate these files? I need them also for the Ansys Forte simulation.


      Please send them to if you have them.


      Thanks


      Garry

    • January 30, 2018 at 5:45 pm
      raul.raghav
      Subscriber

      The zip file consists of the following input files: 



      demo_eng.x_t , lift.prof,tut_port.x_t , tut_gdi_comb.x_t ,comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv



      These files that can help you do the following tutorials:


      (1) Solving a Cold Flow Simulation in IC Engine(Fluent) System: demo_eng.x_t , lift.prof


      (2) Solving a Port Flow Simulation in IC Engine (Fluent) System: tut_port.x_t


      (3) Solving a Gasoline Direct Injection Engine Simulation in IC Engine (Fluent) System: tut_gdi_comb.x_t ,comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv


      Refer to the following links for tutorials on IC engines:


      Ansys How To Videos: ANSYS Internal Combustion Engine (ICE)


      Ansys Internal Combustion Engines


      Tutorial: Solving a Cold Flow Simulation


      The zip file consists of the following input files: 


      demo_eng.x_t , lift.prof,tut_port.x_t , tut_gdi_comb.x_t ,comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv


       


      Note: It is against the rules of the community to share tutorial files. The zip file attached herein were downloaded from various websites online and just put together. As a suggestion, provide an email id here and if someone has the files, they can help you with it.

      • June 25, 2022 at 3:58 pm
        user deleted
        Subscriber

        could I have these zip file please, cuz I'm facing the same problem with my simulation part of my final year project

        my email : 2001870023@su.edu.ye

      • March 24, 2023 at 12:32 pm
        Mustafa Gerengi
        Subscriber

        hi Raul,

         

        thnks for the information. I will be so glad if send me the mentioned file to mail mail adress written below

        ararat04mustafa@yahoo.com

        thnks

    • April 29, 2018 at 8:52 am
      Bidyanka
      Subscriber

      Hello Rahul sir. I'm a B.Tech final year student. I'm trying to form a simulation of SI engine in ansys forte and was wondering if the files provided by you in the above attached zip file are going to work in SI engine as the actual post was regarding diesel engine. In case we need different files for SI engine, can you please provide me with those files. Please send the files at >

       


      Thank you.

    • April 30, 2018 at 4:59 pm
      Inzamam31
      Subscriber

      Hello Rahul sir, I am Inzamam Ul Hussain a final year Btech Mechanical student. Where I can find the SI engine full simulation for ansys forte? Please provide me the files or links at. Thank you sir.

    • April 30, 2018 at 5:32 pm
      raul.raghav
      Subscriber

      Inzamam, you can call me Rahul. Don't have to be formal .


      My first post in this discussion has been updated. You can find the tutorials and the corresponding files from the post.

    • May 1, 2018 at 8:08 am
      Inzamam31
      Subscriber

      Actually i forgot to mention about the combustion of SI engine. I am not being able to find any files for SI engine combustion simulation for ansys forte. So if you have the files or you can provide me the links, then please send me at e-mail address. Your help is really appreciated.

    • May 16, 2018 at 6:08 pm
      Juancito
      Subscriber

      Hello Raul, I would need those files. You could send them to me?


      Thanks!!

    • June 12, 2018 at 6:03 am
      sridharsahoo366
      Subscriber

      Hey are you using ansys Forte for simulating ic engine problems ?


      Hello Rahul, do you work in ansys forte. I am working in ansys forte and facing many problems in modelling. 


      If you have time we can discuss some of the challenges that m facing. 


      please mail me if you do . 


       

    • June 18, 2018 at 6:40 am
      sanusi
      Subscriber

      @raul.raghaz please I need support files for the ci engine combustion simulation on fuent I have tried all the files u supplied here but it wasn't working. I specifically need combustion profile file, the chem rxn, therm file. Will very glad if I can get this files as I'm in a critical need of it.


      Thank you all for your contributions, assist is not limited to anyone my email is .


      regards to all

    • June 18, 2018 at 5:21 pm
      raul.raghav
      Subscriber

      Unfortunately, its against the rules of the forum to share tutorial files. Additionally, the zip file attached in the post above where files that were downloaded from various websites online.


      As a suggestion, you can provide your email id and someone who has the files can help you with it.

    • June 19, 2018 at 2:37 am
      sanusi
      Subscriber

      Thank you so much my email is

    • July 13, 2018 at 9:09 am
      sanusi
      Subscriber

      Hello every one, hope we all doing great?


      I have some challenges in specifying my desired compression ratio for the ci engine simulation, how can I go through this?


       

    • August 7, 2018 at 11:05 am
      sanusi
      Subscriber

      Hello guys, please how is it to obtain the emission parameter result from any ic engine simulation?

    • August 7, 2018 at 11:22 am
      Amine Ben Hadj Ali
      Ansys Employee

      Please start a new thread and elaborate more on your question.

    • October 1, 2018 at 9:17 am
      GurkanErtugral
      Subscriber

      @raul.raghaz Could you send tutorial files to me ?



      (demo_eng.x_t , lift.prof,tut_port.x_t , tut_gdi_comb.x_t ,comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv)


      Best regards.

    • October 2, 2018 at 10:33 am
      Karthik Remella
      Administrator

      Hello,


      Please post your questions in a new thread. You will get more visibility this way. 


      Thank you.


      Best Regards,


      Karthik

    • October 23, 2018 at 11:41 pm
      sanusi
      Subscriber

      hello, please how do i go about it?

    • October 23, 2018 at 11:44 pm
      sanusi
      Subscriber

      thank you so much. but how do i go about that?

    • October 24, 2018 at 2:44 am
      Karthik Remella
      Administrator

      Hello Sanusi,


      Please create a new thread to ask your question. It will improve the visibility of your question on this community. In addition, please elaborate on the exact nature of challenges you are facing during the compression stroke. Please help us understand your question better.


      Thank you for your cooperation.


      Best Regards,


      Karthik

    • November 9, 2018 at 1:40 pm
      Philipadebayo
      Subscriber
      Pls if you have the demo files, kindly send to my email

      Thank you
    • January 4, 2021 at 2:21 pm
      varunreddy
      Subscriber
      Hello everyone, nnI am pursuing M.tech in Thermal engineering and trying to do a project regarding IC engines in CFD. Am in tremendous need of the following files. Please let me know so that I could do research on the simulation of IC engines project and produce some good results.My mail address-n nThank you.nnDiesel_1comp_35sp_chem.inpnnDiese_1comp_35sp_therm.datn #thankyou #CFD #thermal #ICEngines #mechanicalengineeringn
    • January 4, 2021 at 3:36 pm
      Rob
      Forum Moderator
      Those files are from the R19.2 Help, Fluent in Workbench tutorials and should be available from the Ansys support portal if you have a log in. n
    • July 16, 2023 at 4:49 pm
      BELQASSIM ZERGUINE
      Subscriber

       

      CAN ANY ONE HELP ME OUT WITH THE ZIP FILE 

      MY EMAIL IS/ EMail removed - Rob 

       

    • July 17, 2023 at 8:42 am
      Rob
      Forum Moderator

      Click on Help in Forte, and that should take you to the documentation and tutorials. Sharing of Ansys tutorials etc is going to break the Forum rules (and copyright) so I've removed your email address. 

    • November 3, 2023 at 2:03 pm
      mayank shukla
      Subscriber

       

      please can you send me the zip file on mail 

       

    • November 3, 2023 at 2:53 pm
      Rob
      Forum Moderator

      Please read my previous comment. 

Viewing 26 reply threads
  • The topic ‘Need tutorial files for simulation in forte’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.