-
-
May 24, 2024 at 9:53 amTuran SolmazSubscriber
Is it possible to move a part to another location just by utilizing csys, simultanously aligning its vectors at the new locaiton with target csys. I believe single vectors can be aligned in translational direction but not rotations (and this is somehow tedious for me as it needs to be aligned on each vectors.)
Anyone who can shed light into this? Thanks.Â
-
May 27, 2024 at 1:29 pmSubashni RavichandranForum Moderator
Hello Turan,
Let me check on this and get back to you.
Â
-
Viewing 1 reply thread
- The topic ‘Moving a part by using coordinate systems (csys) in Spaceclaim.’ is closed to new replies.
Ansys Innovation Space
Trending discussions
- Speed up simulation in HFSS
- Workbench license error
- ansys fluent error when opening it “unexpected license problem”
- Unexpected error on Workbench: Root element not found.
- Unexpected issues with SCCM deployment of Ansys Fluids and Structures 2024 R1
- not able to get result
- Questions and recommendations: Septum Horn Antenna
- Unable to recover corrupted project in Workbench
- AQWA: Hydrodynamic response error
- Unattended (silent) installation of 2024R2 & -productfile switch
Top Contributors
-
1131
-
468
-
460
-
225
-
201
Top Rated Tags
© 2024 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.