We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
Photonics

Photonics

Topics related to Lumerical and more.

Mode profile in EME and IDE

    • taynara.deoliveira
      Subscriber

      For the same waguide, the mode profile is diferent.

    • Amrita Pati
      Ansys Employee

      Hi Taynara,

      It looks like the first mode profile is a TE mode and the 2nd one is a TM mode. The 2nd mode in FDE matches more closely to the 1st mode in EME. I believe the TE mode is not being shown in EME. Can you use a mesh override region over the waveguide with a finer mesh resolution in EME and rerun the eigenmode solver? Let me know if you don't see any difference.

      Regards,
      Amrita

Viewing 1 reply thread
  • The topic ‘Mode profile in EME and IDE’ is closed to new replies.