Learning Forum

[nm20004]

I'm trying to create a uniform mesh at the hemispherical dome of a cylindrical pressure vessel. I want 34 elements in the lonqitudinal direction of the dome and 88 circumferentially so I apply the appropriate number of divisions at the below edges with the tool of edge sizing and hard behavior.

The 34 elements longitudinally

The 88 elements circumferentially ( 22 at each of the four edges circumferentially)

I also apply mapped face meshing but the result of the mesh is not uniform. This is my result.

And this is the result that I have to achive.

How can I fix my mesh in order to be uniform? Thank you in advance for your help!

[nm20004]

 

May someone help me please? I tried many methods but I am not able to solve my problem.

 

[Deepak]

Hey, please try meshing with by splitting as shown below:

To define longitudinal elements, insert the multi-zone method and face sizing. And then define the intervals.

 

Thanks,

Deepak

[nm20004]

Thank you very much Deepak! It works very well.

[Deepak]

Please mark the post as answered, it is helpful for others.