Mesh controls grayed out

- December 6, 2019 at 3:12 pm
  
  Sam Fares
  Subscriber
  
  Hello,
  
  I am using Ansys Mech Pro 2019 R3. For some reason all mesh controls are grayed out. i have one single body that i selected, but i can't insert any mesh methods.
  
  Thanks!
  
  Sam
- December 6, 2019 at 3:25 pm
  
  peteroznewman
  Subscriber
  
  Is that because you have an STL facet body and not a solid body? You can't mesh facet bodies. Go back to SpaceClaim and right click on the facet body and Convert to Solid.
- December 6, 2019 at 3:49 pm
  
  Sam Fares
  Subscriber
  
  Hi Peter:
  
  The following is what i have in spaceclaim. It shows it is solid. Thanks!
- December 6, 2019 at 7:30 pm
  
  peteroznewman
  Subscriber
  
  Show the Workbench arrangement of analyses. It could be that the mesh is defined in some other block.
- December 6, 2019 at 7:35 pm
  
  Sam Fares
  Subscriber
  
  You are correct Peter! it has been 6 months since i last used Ansys. A bit rusty
  
  Thanks you!
  
  Sam