Maxwell Error in plotting the B Field vs position

- September 19, 2022 at 6:48 am
  
  Vinay_G
  Subscriber
  
  Hello All,
  
  I am trying to plot the air gap B field vs Position,
  
  For this, I have created a circle geometry over the rotor and tried to simulate so that I can select the geometry circle in the "create a field report" dialogue box vs the position but when I tried this I am encountering the following error.
  Can you please help me out to resolve these errors or How can get a rectangular plot of B field vs Position.
  
  Thanks in advance!
- September 19, 2022 at 9:24 am
  
  NKC
  Ansys Employee
  
  Hi Vinay_G,
  You need to mark the circle you have drawn as a non-model in its properties. did you do that?
  Also, I did not understand what do you mean by "select the geometry circle in the "create a field report" dialogue box vs the position"
  Regards,
  Navya
- September 19, 2022 at 9:35 am
  
  Vinay_G
  Subscriber
  
  Hello Sir,
  
  Thanks for the reply, I have done that in the other model like created a cricle as a non model. After that when I tried to plot the B field, I am not able to select the geometry. As I need a B vs position/distance (XY) graph.
  
  What I meant in above is:
- September 20, 2022 at 4:26 am
  
  Vinay_G
  Subscriber
  
  Thanks Sir, I have created a non model polyline and increased the mesh size then I my error got resolved.
- September 20, 2022 at 6:49 am
  
  NKC
  Ansys Employee
  
  Great,
  Good to know your problem is solved.
  Keep learning