TAGGED: #compositematerials, layered-section
-
-
October 4, 2024 at 4:04 pm
s310413
SubscriberHi everyone. I'm trying to modeling a sandwich panel made of three plies in ansys Mechanical, using layered section. The plies have variable thickness along the axis of the wing. In the worksheet of layered section it is possible to set a constant thickness value for the ply. Is it possible to set a variable thickness for the ply?
-
October 7, 2024 at 12:14 pm
mohan.urs
Ansys EmployeeHey,
Check out this link - How to define variable thickness shell elements in ANSYS Mechanical? Is there any verification example of the variable thickness shell modal analysis available? - Ansys Knowledge
Let me know if this worked.
Thanks
-
Viewing 1 reply thread
- You must be logged in to reply to this topic.
Ansys Innovation Space
Trending discussions
- At least one body has been found to have only 1 element in at least 2 directions
- Script Error Code:800a000d
- Element has excessive thickness change, distortion, is turning inside out
- Elastic limit load, Elastic-plastic limit load
- Image to file in Mechanical is bugged and does not show text
- Help to do quasistatic analysis in static structural module
Top Contributors
-
1932
-
823
-
599
-
591
-
366
Top Rated Tags
© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.